SQUARE

Out in the open

OWA Teherani Square

Baffles in a new format – put together as a square ceiling canopy that forms a trapeze when viewed from below. All this is made possible by differing heights and lengths. Combine a number of ceiling canopies to create dynamic ceiling landscapes. Square optimises acoustics in places where it would be impossible to install a closed suspended ceiling, e.g. in existing buildings or below thermally activated ceilings. And with the addition of the Square LED stripes lighting package, you can enjoy Square at its best even when it gets dark.

SQUARE BAFFLE TILE PACKAGE

Systemzeichnung Square e

Dimensions	Height: 150 mm, 200 mm \| dimension: 1230 x 1200 mm
Material	Mineral tile with fleece lamination
Dessin	Sinfonia
Resistance to fire	A2-s1,d0 to EN 13501-1
Edges	3
Colour	white
Thickness	approx. 30 mm
Sound absorption	α_W= 0,65 \| NRC = 0,65
Humidity resistance	up to 95 % RH
Metal suspension	All sections are zinc galvanized and exposed faces white painted
Minimum suspension depth	from top edge baffle tile to underside of soffit 50 mm

OWA Teherani Square Coll

Length	Height	Thickness	α_W/NRC
1200 mm	150 mm	30 mm	0.65
830 mm	200 mm	30 mm	0.65
780 mm	200 mm	30 mm	0.65
730 mm	200 mm	30 mm	0.65
675 mm	200 mm	30 mm	0.65
620 mm	200 mm	30 mm	0.65
570 mm	200 mm	30 mm	0.65

Pack content: 7 pieces, length: 1200 mm, 1 piece each for short lengths, total number of baffle tiles in each package: 13 pieces, Sinfonia tile surface

SQUARE LED LIGHTING PACKAGE

Length	Width	Height	Rating	Performance	Ballast unit
1160 mm	18 mm	21 mm	IP 20	7.4 W/m	LED drivers

Pack contains: 2 LED profiles, incl. the necessary cabling, 4 fastening clips, LED driver, light - colour neutral white 4000 K, warm white 3000 K, blue, red, green, RGB fittings available for additional charge.
The LED profiles (2) are fastened to the square tubes of the Square design pack (3) using the fastening clips included. Thread the ready-made cable through the square tube and connect it to the LED driver. The LED driver is placed on the body of the Square’s hangar structure (3). Ask your electrical contractor to connect the Square to the power supply.

SQUARE DESIGN PACKAGE

Name/dimensions/surface	Content / Package
Square tube 25 x 25 x 2.0 mm, length: approx. 1220 mm, colour: white, fully assembled with connector bar	2 pieces
Connector bar 305 x 200 x 1.0 mm, white	1 pieces

End cap for C-carrier section, plastic, colour: white	4 pieces
Spacer sleeve M 6 x 25 mm, white for direct installation	4 pieces
Fixing plug, ø 11.6 mm, white, for square tube keyholes	26 pieces
Threaded sleeve M 6 x 30 mm, for suspended installation	4 pieces
M 6 x 14 mm, galvanised, for suspended installation	4 pieces